7 Tips On DIY CCTV Installation

The security of your home or office is one of the most important factors that you will need to take care of. The good news is that with DIY CCTV installation, you will end up saving a lot of money on installation costs. It gets better in that you don’t need to have a degree in rocket science to install the system yourself. The internet is full of information that can help you install the system as though you were a professional. If this is the information you are looking for, you are reading the right article as it contains seven tips that will make the installation a walk in the park for you.

Select the best cameras
The success of the DIY installation will largely depend on the type of cameras that you pick. There are infrared cameras that do not need any additional light to work and this means that the installation will be straight and direct. In addition, there are miniatures cameras that are easy to hide, dome cameras that easily change direction and automatic ones that will only record once they sense movement. For the overall success of the installation and for the system to be effective, you need to make sure that you select the right camera.

Position the cameras strategically
The CCTV is meant to help you beef up security in your home or office and for this reason; you need to be very strategic in the placement of the cameras. Generally, the cameras are supposed to be placed high enough to keep them from being vandalized. Secondly, they should be positioned in major entry and exit points in order to record all the movement taking place. If you are placing them outside, it is important that you make sure that they are shielded from the sun, rain and wind for optimum performance.

Select the right recording equipment
Once the cameras have been installed, you will need to pick the right recording equipment. As far as this is concerned, you can opt between independent and computer dependent devices. Independent ones are the best in that they require little interaction with you. They require no disc or tape change as they record on a drive. Should the drive fill up with recorded video, you can delete archived and useless videos to free space.


Select the right networking system
During the DIY CCTV installation, you will need to decide on the type of networking system to use. The automatic networking system is a favorite among many home users since recording is done without the need for someone to be watching the cameras. On the other hand, manual networking systems are a favorite when the CCTV is being installed in establishments. In the manual option, there has to be someone watching the cameras and hence very effective when it comes to the prevention of vandalism and theft.

Select the right cabling
For the system to work cables need to be used and this then means that you must be involved in the selection process of the CCTV cabling. The mention of the word cabling should not make you scared of DIY installation as the system manual comes with the instructions you need to effectively install the cables. The tip to remember is to make sure that the cables are hidden in order to make sure that house is neat and you will be good to go.

Make sure that the system control is secure
As you install the CCTV, you will want to make sure that the control room is secure. The reason for this is that this is where the whole unit is operated from and hence unauthorized entry should be prevented. This will prevent security footage from being deleted. If need be, buy a system that is password protected to prevent deletion.

Follow instructions
The last tip that you need to remember as you carry out the DIY installation is to follow all the instructions given by the manufacturer. This way, you will go a long way in making sure that you avoid simple mistakes that may affect the functioning of the system. The end result of this is that your home will be secure and safe and this is an advantage.